Why are elliptical flat tubes used more often
Information summary：Elliptical flat tubes are widely used because their structural form balances "space utilization" and "performance optimization", which can improve key performance such as heat transfer and load-bearing while saving installation space, and adapt to the actual needs of multiple industries.
Elliptical flat tubes are widely used because their structural form balances "space utilization" and "performance optimization", which can improve key performance such as heat transfer and load-bearing while saving installation space, and adapt to the actual needs of multiple industries.
1. High heat exchange efficiency, suitable for cold and hot exchange scenarios
The cross-sectional shape of elliptical flat tubes can significantly optimize fluid flow and heat exchange efficiency, which is the core logic of their extensive application in the field of heat transfer.
Increase heat transfer area: Compared to circular tubes of the same circumference, elliptical flat tubes have a flatter cross-section and a larger contact area with media such as air and water, which can directly improve heat transfer efficiency.
Optimizing fluid disturbance: The elliptical structure generates more pronounced turbulence when the fluid flows through, reducing the "boundary layer effect" (i.e. the static thin layer formed by the fluid at the pipe wall, which hinders heat transfer), further enhancing heat exchange, especially suitable for equipment such as air conditioning condensers, car radiators, water heaters, etc.
2. High space utilization, saving installation space
The flat shape of the elliptical flat tube can effectively reduce the occupied space and adapt to the design trend of "miniaturization and compactness" in modern equipment.
Reduce installation volume: Under the same heat transfer or load-bearing requirements, the height (flat direction) of the elliptical flat tube is much smaller than that of the circular tube, which can greatly compress the overall size of the equipment. For example, using elliptical flat tubes for the heat exchanger of indoor air conditioning units can make the body thinner; The oval flat tube used for car water tanks can save engine compartment space.
Easy to arrange densely: The flat structure allows pipes to be arranged more tightly (without leaving large gaps like round pipes to avoid collisions), accommodating more pipes in a limited space and improving the heat transfer or transportation capacity per unit space.
3. Excellent structural strength, suitable for multi scenario load-bearing/pressure bearing requirements
The mechanical properties of elliptical flat pipes are balanced, and they perform better than some traditional pipes in terms of load-bearing, bending resistance, and pressure bearing.
Good bending resistance: The long axis direction of the elliptical cross-section has stronger bending resistance, making it less likely to deform when used as a support (such as furniture frames, tent stands); When used as a conveying pipe, it can withstand greater external impacts.
Stable pressure bearing capacity: Compared to completely flat rectangular pipes, the arc-shaped transition structure of elliptical pipes can disperse internal pressure, reduce stress concentration, and withstand certain pressure without easily breaking when transporting liquids or gases (such as small hydraulic pipes and gas branch pipes).
4. Low fluid resistance, reducing transportation energy consumption
When transporting liquids or gases, elliptical flat tubes can reduce fluid flow resistance and help reduce equipment operating energy consumption.
Optimize channel shape: Elliptical cross-section channels are smoother, and the frictional resistance of fluid flow is lower than that of rectangular tubes; At the same time, its flat structure can avoid the "vortex dead corners" formed by the dense arrangement of circular pipes, making fluid flow smoother.
Reduce power demand: Reduced resistance means that power equipment such as pumps and fans can push fluids without consuming too much energy. Long term use can save energy and is suitable for scenarios that require continuous medium delivery, such as water heater pipes and air conditioning refrigerant pipes.
5. Good appearance and adaptability, meeting diverse design needs
The elliptical flat tube has a simpler and more modern shape, and can adapt to special installation scenarios, enhancing the overall texture of the product.
Strong aesthetic appeal: The flat elliptical shape is more in line with modern minimalist design styles than circular pipes, and is commonly used in furniture, lighting fixtures, decorative railings, etc., balancing functionality and aesthetics.
Adapt to special scenarios: In scenarios where it is necessary to fit curved surfaces or narrow spaces (such as car seat frames, medical device shell supports), the flat structure of the elliptical flat tube can better fit the installation surface, avoiding protrusion or occupying too much space.
CN
EN 
微信號：WEIXINHAOMA
Service Hotline：400-100-7068
Address: No. 15, Liuzhou Road, Yushan High-tech Industrial Park, Changshu
E-email：info@sinupower.com
Wechat
Visit us
Please Call